WEEK 11 (FYP 2)

WEEK 11

Burning the Hex File to the Microcontroller.

To burn the microcontroller its need to used 8051 Mini Kit-board and software ProgIsp. Below is the simple step to burn the microcontroller IC.

Step to burn Atmel AT89S52

1.    Install the driver for the 8051 Mini Kit-board so that the computer can recognize the hardware.

2.    Run ProgIsp

3.    Insert the Atmel AT89S52 into the 40 pin slot, and lock at the kit.

4.    Click erase button to erase the older hex file

5.    Load flesh by selecting the hex file that need to be burn.

6.    Press auto to start the burning process.

Figure  show 8051 Mini Kit-board model AD-MCSZ V.1 that is used to burn the program inside the microcontroller.

show the interfaced software that being used as a program that is called ProgIsp.